Your vehicle Select a vehicle to check exact fitment Browse vehicles with matching products, or use VIN to identify any supported vehicle.

AEM Universal High Output Inductive Smart Coil — 30-2853

SKU: 30-2853 Category: Brand:AEM

$83.66

9 in stock

AEM Universal High Output Inductive Smart Coil

Fitment not yet confirmedContact TuneRS Mall to confirm compatibility before ordering.
California / CARB prohibited
California Proposition 65

9 in stock

Your vehicleFitment not confirmed
Secure CheckoutEncrypted payment processing
Returns & RefundsEligibility and exclusions apply
Fitment HelpPorsche-specific guidance

PRODUCT DETAILS

AEM Universal High Output Inductive Smart Coil

AEM High Output IGBT Smart and Dumb Coils are designed for coil-near-plug use ONLY and are not intended for distributed ignition systems. AEM cannot guarantee or warranty IGBT coil performance when used on distributed ignition vehicles. The coil delivers a minimum 40kV output with no load and 40kV ±10% with a 50pF load. Output energy is 103 mJ ±7%, peak secondary current is 102 mA ±10%, arc duration is 2.9 mS ±10%, and turns ratio is 71:1. Maximum current is 19 amps with a maximum battery voltage of 17 volts. Base dwell is 3.0 mS. Maximum continuous dwell is 9 mS and should not exceed a 40% duty cycle, while maximum intermittent dwell is 80% duty cycle for up to 5 seconds. Uses a Packard/Delphi 12162825 “Pull to Seat” mating connector and Packard/Delphi 12124075 “Pull to Seat” mating contacts. The high-tension wire terminal uses an HEI “spark plug top” style connection.

Auto enthusiasts who have forced induction engines, high RPM engines or run nitrous oxide are aware of the compromises that come with using inductive coils instead of converting to a Capacitive Discharge Ignition system (CDI). While inductive coils deliver a long spark duration with simplicity, they lack the energy to adequately ignite the mixture in the combustion chamber of a highly modified performance vehicle. Conversely, CDIs deliver an intense burst of spark energy, but with practically no spark duration, which makes having the proper air/fuel mixture in the combustion chamber paramount for best performance. This compromise ends with AEM’s High-Output IGBT “Smart” Inductive Coils.

AEM’s High-Output Inductive Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts-as much as most CDI systems, without the need for a CDI module! They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration.

The tradeoff between adequate spark energy and adequate spark duration ends with AEM’s High-Output Inductive Coils, the first inductive coils that deliver CDI-like spark energy and voltage, and the long spark duration necessary for vehicles running high compression, high RPM, forced induction and/or nitrous engines.

AEM’s High-Output, Insulated Gate Bipolar Transistor (IGBT) “Smart” Inductive Coils are designed for use on applications that do not have an external igniter.

Deliver CDI-like spark energy-No CDI Module needed

Inductive Smart Coil, Spark Energy up to 118 mJ!

Up to 40kV Output Voltage, without using a CDI

Incredibly long spark duration, up to 2.9mS

Can be mounted directly to the Engine

Cost less than aftermarket LS1 coils

Massive Spark Energy, up to 103 mJ

High Output Inductive Smart Coil

Can be mounted almost anywhere

Weather and Shockproof design

AEM – Hi Output Smart Coil

AEM High Output Smart Coil

SMART HO DIS COIL KIT

Hi Output Smart Coil

High Output Smart

Ignition Coil

AEMEIGNICOIL

Product resources

Compatible VehiclesFitment details
Fitment not yet confirmedContact TuneRS Mall to confirm compatibility before ordering.

Reviews

Be the first to review “AEM Universal High Output Inductive Smart Coil — 30-2853”

Your email address will not be published. Required fields are marked *