Your vehicle Select a vehicle to check exact fitment Browse vehicles with matching products, or use VIN to identify any supported vehicle.

KW Coilover Kit V1 2014 BMW 328i xDrive Sedan — 1022000S

SKU: 1022000S Category: Brand:KW Suspension

$2,094.00

1 in stock

KW Coilover Kit V1 2014 BMW 328i xDrive Sedan

Vehicle-Specific FitmentSelect your vehicle to confirm that this product fits.

1 in stock

Your vehicleCheck fit
Secure CheckoutEncrypted payment processing
Returns & RefundsEligibility and exclusions apply
Fitment HelpPorsche-specific guidance

PRODUCT DETAILS

KW Coilover Kit V1 2014 BMW 328i xDrive Sedan

The KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after you r car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.

The KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the N?rburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.

For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers “Made in Germany”. Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coilover kits will exceed the original equipment manufacturer quality and offer useful and innovative solutions. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.

The ideal system for customers who like to choose the custom lowering of their vehicle while counting on the extensive experience of our engineers to preset the dampers for the ultimate balance between sporty driving, comfort, and safety.

Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.

With the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you.

Composite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.

Inox-Line Stainless Steel – Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.

Seamless Ride Height Adjustment – the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.

KW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.

Every single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.

KW Coilover Kit V1 BMW 4series F32 435i Coupe 3.0 AWD; not equipped with EDC (Electronic Damper Control)

bmw coilovers, lowering coilover kit, coil springs, performance suspension, V1, coilover kit, kw

2014-2020 BMW 4 series (F32) without electronic dampers 435i, 440i, Coupe, xDrive 4WD

Height adjustable stainless steel coilover system with pre-configured damping

KW Coilover Kit V1 BMW 4series F32 Coupe 3.0 AWD; not equipped with EDC

2012-2018 BMW 3 series (F30) without EDC 335i, 340i 4WD (xDrive);

Limited Lifetime Warranty – Unlimited Mileage

Coilover Adjustable Spring Lowering Kit

KW COILOVER KIT V1 – 1022000S

KW Coilover Kit V1

Coilover Kit

Product resources

Compatible Vehicles65 exact fitments • 18 grouped rows
YearsMakeModelTrimEngine
2013–2018BMW320i xDriveBase — Sedan (4-door)2.0L I4 Turbocharged Gasoline
2014–2018BMW328d xDriveBase — Sedan (4-door) / Wagon (4-door)2.0L I4 Turbocharged DIESEL
2013BMW328i xDriveBase — Coupe (2-door)2.0L I4 Turbocharged Gasoline — Engine N20B20A / N26B20A
2013BMW328i xDriveBase — Coupe (2-door) / Sedan (4-door)3.0L I6 Naturally Aspirated Gasoline
2013–2015BMW328i xDriveBase — Sedan (4-door)2.0L I4 Turbocharged Gasoline — Engine N20B20A / N26B20A
2014–2015BMW328i xDriveBase — Wagon (4-door)2.0L I4 Turbocharged Gasoline — Engine N20B20A / N26B20A
2016BMW328i xDriveBase — Sedan (4-door) / Wagon (4-door)2.0L I4 Turbocharged Gasoline
2017–2018BMW330i xDriveBase — Sedan (4-door) / Wagon (4-door)2.0L I4 Turbocharged Gasoline
2013BMW335i xDriveBase — Coupe (2-door)3.0L I6 Turbocharged Gasoline
2013–2015BMW335i xDriveBase — Sedan (4-door)3.0L I6 Turbocharged Gasoline
2016BMW340iBase — Sedan (4-door)3.0L I6 Turbocharged Gasoline
2016–2018BMW340i xDriveBase — Sedan (4-door)3.0L I6 Turbocharged Gasoline
2014BMW428i xDriveBase — Convertible (2-door) / Coupe (2-door)2.0L I4 Turbocharged Gasoline — Engine N20B20A / N26B20A
2015–2016BMW428i xDriveBase — Convertible (2-door) / Coupe (2-door)2.0L I4 Turbocharged Gasoline
2017–2020BMW430i xDriveBase — Convertible (2-door) / Coupe (2-door)2.0L I4 Turbocharged Gasoline
2014–2016BMW435i xDriveBase — Coupe (2-door)3.0L I6 Turbocharged Gasoline
2015–2016BMW435i xDriveBase — Convertible (2-door)3.0L I6 Turbocharged Gasoline
2017–2020BMW440i xDriveBase — Convertible (2-door) / Coupe (2-door)3.0L I6 Turbocharged Gasoline

Fitment information is a guide. Review product notes and contact TuneRS Mall when production dates, option codes, brake packages, transmissions, or other equipment may affect compatibility.

Reviews

Be the first to review “KW Coilover Kit V1 2014 BMW 328i xDrive Sedan — 1022000S”

Your email address will not be published. Required fields are marked *