AEM Inlet Air Temperature Sensor Kit for EMS — 30-2010

AEM Inlet Air Temperature Sensor Kit for EMS

Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil

Air Temp Sensor Kit, 3/8-inch NPT, Includes Air Temp Sensor, 3/8-inch NPT Aluminum Bung, Connector and Pins

AEM’s Air Inlet Temperature Sensor Kits (AIT) senses the air temperature on the inlet side of the engine.

Air Temp Sensor Kit. 3/8 inNPT. Includes: Air Temp Sensor, 3/8 inNPT Aluminum Bung, Connector & Pins

Air Temp Sensor Kit. 3/8″NPT. Includes: Air Temp Sensor, 3/8″NPT Aluminum Bung, Connector & Pins

Electrical Termination: Weatherproof connector. Includes Mating Connector, Pins & Wire Seals

Includes: Air Temp Sensor, 3/8″ NPT Alumium Bung, Mating Connector, Pins & Wire Seals

-20C to 150C / -4F to 302F – 3/8″ NPT – Connector Kit and Pins

Senses the air temperature on the inlet side of the engine

Operating Temp: -40C to 135C / -40F to 275F

Temp scale of -20C to 150C / -4F to 302F

Installation Torque: 20Nm / 15 ft-lbs

Resistive Range (?): See Table

30-2010 – Air Temp Sensor Kit

Air Charge Temperature Sensor

Sensor Body Material: Brass

Connector and pins included

AIR TEMP SENSOR KIT 38 NPT

AEM – Sensors/Connectors

AEM Air Temp Sensor Kit

Accuracy: < 1.5C / 2.7F

Weatherproof connector

Air Temp Sensor Kit

Sensors/Connectors

Thread: 3/8″ NPT

Hex Size: 3/4″

Weight: 33.3g

AEMEAIRCHAR

New!!!

Product resources

• User 1
• User 1
• Warranty
• Installation Instructions